If you are checking used Doosan machining centre prices in Canada because you are thinking of selling, the short answer is that most used Doosan vertical machining centres trade in a broad range — roughly $18,000 CAD for an older, smaller, higher-hour machine to $120,000 CAD or more for a newer, larger, well-optioned model in strong condition. Where your machine sits in that range depends on its exact model, year, spindle hours, control, options and how well it still runs under power. This guide breaks down used Doosan machining centre prices in Canada by model family and age, explains what moves the price up or down, and shows you how to get a valuation based on your machine itself, not on a listing for a different machine in another country.
Sam CNC Machinery Enterprises LTD buys used CNC lathes and machining centres across Canada, including Doosan machining centres. We also review Haas, Mazak, DMG MORI, Okuma, Hyundai WIA and Nakamura-Tome machines. Our base is in Port Coquitlam, BC, and we regularly review machines from shops in Ontario, Alberta, Quebec and across the country.
Used Doosan Machining Centre Prices in Canada by Model and Age
Doosan machining centres — sold under the DN Solutions name since 2022, but still widely searched and traded as Doosan — cover several familiar families. The DNM series vertical machining centres, such as the DNM 400, DNM 4500, DNM 5700 and larger DNM 750 models, are the machines Canadian sellers most often ask about. Older Mynx verticals, DVC-series machines and NHP horizontal machining centres also appear on the used market, each with a different buyer pool and price level.
As broad orientation only, older Doosan verticals from the 2000s, including early DNM and Mynx models with higher hours, commonly sit roughly in the $18,000–$45,000 CAD range. Mid-2010s DNM machines in good working condition, with a FANUC or Doosan FANUC control, a working tool changer and reasonable hours, commonly sit roughly in the $45,000–$95,000 CAD range. Newer, larger or better-optioned machines — late-model DNM 5700 or 750 models, machines with a fourth axis, probing and through-spindle coolant, and NHP horizontals in strong condition — can sit roughly in the $95,000–$180,000 CAD range or above it.
Disclaimer: These figures are indicative Canadian market ranges only. The actual value of your specific machine depends on its year, condition, spindle hours, controller, tooling, configuration, accuracy and current market demand. No figure in this article is a promise of a specific offer, price, pickup date or payment terms. Only a valuation based on your machine’s actual details can tell you what it is worth.
What Moves Used Doosan Machining Centre Prices in Canada Up or Down
Year and hours are the starting point, not the whole story. Buyers read the power-on time, spindle hours and cutting hours on the control and compare them with the machine’s physical condition. A well-maintained machine with higher hours and complete service records can be worth more to a serious buyer than a lower-hour machine with no records, a noisy spindle or a history of repeated alarms.
Condition under power matters most. A Doosan that homes cleanly, runs the spindle quietly through its speed range, changes tools reliably and holds size on a test cut is easy to value with confidence. Spindle bearing noise, backlash, way-lube problems, a faulty tool changer, damaged taper or unresolved servo and spindle alarms all reduce the price, because the buyer has to allow for repair cost and risk. A machine that is disconnected and cannot be inspected under power is almost always valued more cautiously than the same machine still running.
Configuration changes the buyer pool. A larger travel envelope, a 12,000 RPM or higher spindle, a 30-tool or larger magazine, through-spindle coolant, a chip conveyor, probing and tool setting, and a fourth-axis rotary table that all work as they should each make the machine useful to more shops. Options that are listed but not working do the opposite — they create doubt. Control type also matters in Canada: FANUC-controlled Doosan machines benefit from a wide base of operators and service support, which helps resale. For a broader explanation of how these factors combine, see our guide to what a used CNC machine is worth in Canada.
Which Doosan Models Hold Their Value Best in Canada?
The mainstream DNM verticals tend to hold value best because they fit the largest number of Canadian job shops: familiar travels, common BT40 or BT50 tapers, FANUC controls and parts and service that buyers can still source. A clean, mid-2010s DNM 4500 or DNM 5700 with documented maintenance is a straightforward machine for a buyer to picture in production, and straightforward machines usually attract stronger offers.
Larger DNM models and NHP horizontals serve a smaller, more specific pool. When they are accurate, complete and well documented, they can command strong prices from production shops. When they need work, the discount is usually larger, because fewer buyers are willing to take on a big repair. Very small or very old Doosan verticals still sell, but mainly on price and working condition rather than specification. In every case, completeness helps: manuals, parameter backups, electrical drawings, service invoices and included tool holders, vices and rotary equipment all reduce a buyer’s risk.
If you are preparing to sell, start from our Sell Your CNC Machine page, and see the types of equipment we purchase on our Buy CNC Machines page.
How to Check Your Price Before You List or Sell
Do not set your asking price from a single online listing. Advertised prices are asking prices, not sold prices, and a listing in the United States or overseas does not reflect Canadian demand, freight, rigging or the cost of moving a machine between provinces. A cleaner check has three steps. First, write down your machine’s full identity: exact model, year, serial number, control and software, spindle hours, travels, table size, taper, spindle speed and tool magazine capacity. Second, document its real condition: recent parts it has made, known faults, service history, included tooling and accessories, plus clear photos and a short video of it running under power, changing tools and moving on all axes. Third, ask for a valuation based on that complete package and compare any offer on written terms — price, included items, who pays for rigging and freight, payment method and removal window — not on the headline number alone.
Preparation is simple and it pays. Clean the work envelope, coolant tank and chip conveyor so leaks and damage are visible rather than hidden. Top up way oil, fix minor coolant leaks, gather manuals and invoices in one folder, and run the machine the morning any buyer inspects it. Disclose known faults early: a disclosed fault with a repair quote is negotiable, while the same fault found during inspection usually lowers the whole offer. Our FAQ page answers common questions about rigging, removal and how a direct sale works.
Frequently Asked Questions
What are typical used Doosan machining centre prices in Canada?
As indicative orientation only, older 2000s Doosan verticals commonly sit around $18,000–$45,000 CAD, mid-2010s DNM machines in good condition around $45,000–$95,000 CAD, and newer, larger or better-optioned machines around $95,000–$180,000 CAD or more. The actual value depends on year, condition, hours and configuration.
Does the DN Solutions name change affect my Doosan machine’s value?
Not by itself. Doosan machine tools were rebranded as DN Solutions in 2022, and buyers search for both names. What matters is the exact model, year, control, condition and support available for your machine, not the badge alone.
Do FANUC-controlled Doosan machines sell for more?
Often they are easier to sell in Canada, because many operators know FANUC and service support is widely available. That broader buyer pool can support a stronger price, provided the machine’s condition and hours back it up.
Should I sell my Doosan with its tooling and rotary table?
Usually yes, as a complete package. Working tool holders, vices, probing and a fourth-axis rotary have real value to a buyer and are worth more included with the machine than sold separately in most cases. List everything included honestly.
Can I sell a Doosan machining centre if I am outside British Columbia?
Yes. We buy used machining centres across Canada. Interprovincial sales are common — the key points are a complete description with photos and video, written terms, verified payment, a qualified rigger for loading and suitable freight.
Get a Free, No-Obligation Valuation of Your Machine
Get a free, no-obligation valuation of your machine — send Sam CNC Machinery Enterprises LTD the model, year, serial number, spindle hours, configuration, photos and tooling list for your used Doosan machining centre, and we will review them and come back with our assessment. Call us at +1 (604) 710-8079 or email info@cncsam.com.
Sam CNC Machinery Enterprises LTD, Unit 6, 1770 McLean Ave, Port Coquitlam, BC V3C 4K8, Canada. Phone: +1 (604) 710-8079 | Email: info@cncsam.com | Web: www.cncsam.com

